GUIDELINES OF MAJOR PROJECT
DEPTT. OF MECHANICAL ENGINEERING
B.TECH. MAJOR PROJECT PROPOSAL
Name of Student and registration Number –cum – Roll No. :
Present Official Address :
E-mail Id:
<!--[if !supportLists]-->4. <!--[endif]-->Mobile No. :
Branch: B. Tech. (Mechanical)
Year of Admission :
Proposed Topics/Ideas :
PROJECT REPORT
(16 Normal Times New Roman)
On
(17 Times New Roman)
RBS
(20 Times New Roman)
SUBMITTED BY -: (14 Times New Roman)
NAME 1 ROLL NO
NAME 2 ROLL NO
NAME 3 ROLL NO
(16 Times New Roman)
UNDER THE GUIDANCE OF (12 Times New Roman)
MR. ABC (16 Times New Roman)
<!--[if !vml]-->
<!--[endif]--><!--[if !mso]-->
<!--[endif]-->
LOGO
<!--[if !mso]-->
<!--[endif]--><!--[if !mso & !vml]--> <!--[endif]--><!--[if !vml]-->
<!--[endif]-->
DEPTT. OF MECHANICAL ENGINEERING
(13Times New Roman)
COLLEGE NAME
(1st letter 20, rest 14 Times New Roman)
2003-07
(15 Times New Roman)
COLLEGE NAME WITH ADDRESS
(1st letter 20, rest 14 Times New Roman)
DEPTT. OF MECHANICAL ENGINEERING
Certificate
(14 Times New Roman)
This is to certify that NAME (Univ. ROLL No.), NAME 2 (Univ. ROLL No.), NAME (Univ. ROLL No. ), have satisfactory completed the project entitled “PROJECT NAME ” as prescribed by UNIVERSITY NAME, CITY, in partial fulfillment of the requirement for award of the Degree of Bachelor of TECHNOLOGY IN Mechanical Engineering during academic year
(12 Times New Roman)
Project Guide: - (12 Times New Roman) HEAD MECHANICAL
EXTERNAL EXAMINER
1.
2.
<!--[if !vml]--><!--[endif]-->CONTENTS
(14 Times New Roman)
Problem Profile 1 to 2
General Block Diagram 2 to 4
Hardware Description 5 to 15
Software Description 16 to 25
Testing and Debugging 26 to 30
Practical Considerations 31 to 35
Applications 35 to 37
Conclusion 38 to 40
Appendix I
Data Sheets
Appendix II
Bibliography (13 Times New Roman)
Appendix III
List of Figures
Appendix IV
List of Tables used
Micro-Controller Based Robotic System
<!--[if !vml]--><!--[endif]-->
(11 Times New Roman)
General Guidelines
<!--[if !supportLists]-->Ø <!--[endif]-->Text should be typed in Times New Roman 12 & double line spaced.
<!--[if !supportLists]-->Ø <!--[endif]-->Headings should be bold Times New Roman 14 (Normal Case)
<!--[if !supportLists]-->Ø <!--[endif]-->Sub-headings should be Bold, Italics Times New Roman 13(Normal Case)
<!--[if !supportLists]-->Ø <!--[endif]-->All the tables & figures have to be marked with Roman Numerals e.g. Table I, Figure III.
<!--[if !supportLists]-->Ø <!--[endif]-->Reports must be hard binded with blue colored Velvet covering.
<!--[if !supportLists]-->Ø <!--[endif]-->2 copies of the report are required to be submitted to the department (1 for department library & 1 for project guide).
<!--[if !supportLists]-->Ø <!--[endif]-->Page setup for Report is : A4 page with following margins
Top 1 inch
Bottom 1 inch
Left 1.8 inch
Right 0.9 inch
<!--[if !supportLists]-->Ø <!--[endif]-->All the pages of the report have to be numbered in the following manner Page 1of 45.
<!--[if !supportLists]-->Ø <!--[endif]-->Hardware description should consist of detailed description up to component level.
<!--[if !supportLists]-->Ø <!--[endif]-->Software description should include flow chart along with complete code. Comments should accompany the code.
<!--[if !vml]--><!--[endif]-->
Name of the chapter Page 1 of 47
ACKNOWLEDGEMENT
(14 Times New Roman)
We express our gratitude to the UNIVERSITY NAME, CITY, for giving us the opportunity to work on the major project during our final year of B. Tech. Project work is an important aspect in the field of engineering.
It is not until you undertake projects like these that you realize how massive the effort it really is, or how much you must rely upon the selfless efforts and goodwill of others. There are many who helped us with these projects, and we want to thank them all.
We would like to thank Prof. (Dr.) AAA, Director, UNIVERSITY NAME, CITY for his kind support. Our special thanks to XYZ, HOD, Mechanical Engineering, for his invaluable guidance throughout our project work.
We specially thank Mr. ABC project guide, who’s invaluable guidance in this difficult and endeavor period has provided us with the requisite motivation to complete our project successfully.
We specially appreciate the help and guidance all those people who have directly or indirectly helped us making our project a success.
(12 Times New Roman)
PROJECT ASSOCIATES
<!--[if !supportLists]-->1. <!--[endif]-->A
<!--[if !supportLists]-->2. <!--[endif]-->B
<!--[if !supportLists]-->3. <!--[endif]-->C
<!--[if !supportLists]-->4. <!--[endif]-->D
DEPTT. OF MECHANICAL ENGINEERING
B.TECH. MAJOR PROJECT PROPOSAL
Name of Student and registration Number –cum – Roll No. :
Present Official Address :
E-mail Id:
<!--[if !supportLists]-->4. <!--[endif]-->Mobile No. :
Branch: B. Tech. (Mechanical)
Year of Admission :
Proposed Topics/Ideas :
PROJECT REPORT
(16 Normal Times New Roman)
On
(17 Times New Roman)
RBS
(20 Times New Roman)
SUBMITTED BY -: (14 Times New Roman)
NAME 1 ROLL NO
NAME 2 ROLL NO
NAME 3 ROLL NO
(16 Times New Roman)
UNDER THE GUIDANCE OF (12 Times New Roman)
MR. ABC (16 Times New Roman)
<!--[if !vml]-->
<!--[endif]--><!--[if !mso]-->
<!--[endif]-->
LOGO
<!--[if !mso]-->
<!--[endif]--><!--[if !mso & !vml]--> <!--[endif]--><!--[if !vml]-->
<!--[endif]-->
DEPTT. OF MECHANICAL ENGINEERING
(13Times New Roman)
COLLEGE NAME
(1st letter 20, rest 14 Times New Roman)
2003-07
(15 Times New Roman)
COLLEGE NAME WITH ADDRESS
(1st letter 20, rest 14 Times New Roman)
DEPTT. OF MECHANICAL ENGINEERING
Certificate
(14 Times New Roman)
This is to certify that NAME (Univ. ROLL No.), NAME 2 (Univ. ROLL No.), NAME (Univ. ROLL No. ), have satisfactory completed the project entitled “PROJECT NAME ” as prescribed by UNIVERSITY NAME, CITY, in partial fulfillment of the requirement for award of the Degree of Bachelor of TECHNOLOGY IN Mechanical Engineering during academic year
(12 Times New Roman)
Project Guide: - (12 Times New Roman) HEAD MECHANICAL
EXTERNAL EXAMINER
1.
2.
<!--[if !vml]--><!--[endif]-->CONTENTS
(14 Times New Roman)
Problem Profile 1 to 2
General Block Diagram 2 to 4
Hardware Description 5 to 15
Software Description 16 to 25
Testing and Debugging 26 to 30
Practical Considerations 31 to 35
Applications 35 to 37
Conclusion 38 to 40
Appendix I
Data Sheets
Appendix II
Bibliography (13 Times New Roman)
Appendix III
List of Figures
Appendix IV
List of Tables used
Micro-Controller Based Robotic System
<!--[if !vml]--><!--[endif]-->
(11 Times New Roman)
General Guidelines
<!--[if !supportLists]-->Ø <!--[endif]-->Text should be typed in Times New Roman 12 & double line spaced.
<!--[if !supportLists]-->Ø <!--[endif]-->Headings should be bold Times New Roman 14 (Normal Case)
<!--[if !supportLists]-->Ø <!--[endif]-->Sub-headings should be Bold, Italics Times New Roman 13(Normal Case)
<!--[if !supportLists]-->Ø <!--[endif]-->All the tables & figures have to be marked with Roman Numerals e.g. Table I, Figure III.
<!--[if !supportLists]-->Ø <!--[endif]-->Reports must be hard binded with blue colored Velvet covering.
<!--[if !supportLists]-->Ø <!--[endif]-->2 copies of the report are required to be submitted to the department (1 for department library & 1 for project guide).
<!--[if !supportLists]-->Ø <!--[endif]-->Page setup for Report is : A4 page with following margins
Top 1 inch
Bottom 1 inch
Left 1.8 inch
Right 0.9 inch
<!--[if !supportLists]-->Ø <!--[endif]-->All the pages of the report have to be numbered in the following manner Page 1of 45.
<!--[if !supportLists]-->Ø <!--[endif]-->Hardware description should consist of detailed description up to component level.
<!--[if !supportLists]-->Ø <!--[endif]-->Software description should include flow chart along with complete code. Comments should accompany the code.
<!--[if !vml]--><!--[endif]-->
Name of the chapter Page 1 of 47
ACKNOWLEDGEMENT
(14 Times New Roman)
We express our gratitude to the UNIVERSITY NAME, CITY, for giving us the opportunity to work on the major project during our final year of B. Tech. Project work is an important aspect in the field of engineering.
It is not until you undertake projects like these that you realize how massive the effort it really is, or how much you must rely upon the selfless efforts and goodwill of others. There are many who helped us with these projects, and we want to thank them all.
We would like to thank Prof. (Dr.) AAA, Director, UNIVERSITY NAME, CITY for his kind support. Our special thanks to XYZ, HOD, Mechanical Engineering, for his invaluable guidance throughout our project work.
We specially thank Mr. ABC project guide, who’s invaluable guidance in this difficult and endeavor period has provided us with the requisite motivation to complete our project successfully.
We specially appreciate the help and guidance all those people who have directly or indirectly helped us making our project a success.
(12 Times New Roman)
PROJECT ASSOCIATES
<!--[if !supportLists]-->1. <!--[endif]-->A
<!--[if !supportLists]-->2. <!--[endif]-->B
<!--[if !supportLists]-->3. <!--[endif]-->C
<!--[if !supportLists]-->4. <!--[endif]-->D
No comments:
Post a Comment